Single-stage Reciprocating Compressor
3 to 50 Horsepower; 0 to 150 PSIG Inlet Pressure
Maximum Discharge Pressure 1-stage 300 PSIG
3 to 50 Horsepower; 0 to 150 PSIG Inlet Pressure
Maximum Discharge Pressure 1-stage 300 PSIG
The TESCORP "BVR-1" Series is a completely self-contained compression system for applications for stock tank vapor recovery,flare gas recovery, or small flow, medium pressure process gas applications. Constructed as a compact and fully-contained system,it is constructed with a Blackmer air-cooled, single-stage, pressure lubricated,reciprocating gas compressor and TESCORP vapor recovery unit technology and components. The BVR-1 Vapor Recovery Unit is designed for applications in field gas or refinery process applications where very saturated and/or corrosive gases must be processed.
*Price available upon request
The unit offers the following design and optional features:
Single-stage reciprocating compressor with:
Single or multi-stage, lubricated cylinders
Pressure lubricated power-frame compressor
Single or multiple distance piece(s) and seal assembly(s)
Premium efficiency electric motor drive with:TEFC enclosure, NEMA "B" torque, 1.15 service factor
Suction and inter-stage scrubbers are constructed per the following:Designed, constructed, stamped and National Board Certified per ASME Section VIII
1/8" corrosion allowance
Condensate level controls, gauges, pump rated for flow and pressure
Piping materials, welding procedures, design and construction are per the following:ANSI B31.3 latest edition
Premium efficiency electric motor drive with:
Suction and inter-stage scrubbers are constructed per the following:
Piping materials, welding procedures, design and construction are per the following:
Vapor Recovery Control Panel is designed per NEC Class I, Division II, Class B,C, & D with:
TESCORP vapor recovery logic, controls and indicators
Linear flow control logic with proportional bypass valve
DCS communication logic
BVR-1 Unit Construction:All electrical components and wiring per NEC Class I, Division II, Class B,C, & D
All rotating equipment is fully protected with non-sparking guards
All units receive a complete mechanical/control run test with documentation
Options:Motor starters and/or VFD drives
2 or 3 piece distance piece and seal assemblies available
Sour gas trim for compressor availableup to 8% H2S
BVR-1 Unit Construction:
Options: