BVR-M 1 (Modular)

Single-stage Reciprocating Compressor
Air-cooled, Oil-free
3 to 30 Horsepower (13 sizes available)
VRU flows from 15 to 5 MSCFD @atmos
Flash gas booster flows to 400 Mscfd
Inlet pressure: 0 to 80 Psig
Discharge pressures: up to 260 Psig

The TESCORP "BVR-MODULAR 1" Series is a completely self-contained compression system for applications for stock tank vapor recovery, flare gas recovery, or small flow, medium pressure process gas applications. Created as a compact and fully-contained system, it is constructed with a Blackmer air-cooled, single-stage, pressure lubricated, reciprocating gas compressor and TESCORP vapor recovery unit technology and components. The BVR-MODULAR 1 Vapor Recovery Unit is designed for applications in field gas or refinery process applications where very saturated and/or corrosive gases must be processed.

The unit offers the following design and optional features:
Single-stage reciprocating compressor with:
  • Single-stage, single-acting, air-cooled
  • Pressure lubricated power-frame compressor
  • Single distance piece and seal assembly
  • Corrosive gas trim

  • Premium efficiency electric motor drive with:
  • TEFC enclosure, NEMA "B" torque, 1.15 service factor

  • Suction scrubber constructed per the following:
  • Designed, constructed, stamped and National Board Certified per ASME Section VIII
  • 1/8" corrosion allowance
  • Condensate level controls, gauges, pump rated for flow and pressure

  • Piping materials, welding procedures, design and construction are per the following:
  • All gas transmission piping 2” and smaller shall be either NPT or tubing
  • ANSI B31.3 latest edition

  • Vapor Recovery Control Panel is designed per NEC Class I, Division II, Class B, C & D with:
  • TESCORP vapor recovery logic, controls and indicators
  • Linear flow control logic with proportional bypass valve
  • Load/unload flow control and control logic

  • BVR-MODULAR 1 Unit Construction:
  • All electrical components and wiring per NEC Class I, Division II, Class B, C & D
  • All rotating equipment is fully protected with non-sparking guards
  • All units receive a complete mechanical/control run test with documentation

  • Options:
  • Controls and panels per customer preference
  • Motor starters and/or VFD drives
  • 2 or 3 piece distance piece and seal assemblies available
  • Sour gas trim for compressor available
    • Your Name (required)

      Your Email (required)


      Your Message